BMGZZ - VARGLAS SILICONE RUBBER SLEEVING
- MSDS: BMGZZ
- Manufacturer: VARFLEX CORP
- Product Name: VARGLAS SILICONE RUBBER SLEEVING
- National Stock Number: 5970-01-288-6753
Product Identification
Product ID:VARGLAS SILICONE RUBBER SLEEVING
MSDS Date:04/27/1989
FSC:5970
NIIN:01-288-6753
MSDS Number: BMGZZ
Responsible Party
ROME, NY 13440
US
Emergency Phone: 315-337-3642
Info Phone: 315-336-4400
Cage: 79074
Contractor
Telephone: 315-336-4400
Cage: 79074
Ingredients
FIBER GLASS -SIO*2,NA2CO*3,CAO
SILICONE RUBBER-VINYL,METHYL & PHENYL SILICONES
Hazards
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE- EYES/SKIN: MECHANICAL
IRRITATION. INHALATION: UNLIKELY TO OCCUR. INGESTION: UNKNOWN.
CHRONIC- NONE.
Effects of Overexposure:MECHANICAL IRRITATION OF EYES AND SKIN.
INHALATION: UNLIKELY TO OCCUR.
Medical Cond Aggravated by Exposure:SKIN PROBLEM
First Aid
First Aid:GET MEDICAL ATTENTION IF SYMPTOMS PERSIST. EYE/SKIN: FLUSH
WITH WATER FOR 15 MINUTES. HOLD EYELIDS OPEN. INHALED: REMOVE TO
FRESH AIR. ORAL: FLUSH OUT MOUTH WITH WATER. SEEK MEDICAL
ATTENTION.
Fire Fighting
Flash Point:NONE
Extinguishing Media:CARBON DIOXIDE, FOAM OR DRY CHEMICAL. WATER SPRAY
MAY BE USED TO KEEP FIRE EXPOSED CONTAINERS COOL & FLUSH SPILLS
AWAY.
Fire Fighting Procedures:WEAR FULL PROTECTIVE CLOTHING AND
NIOSH-APPROVED SELF-CONTAINED BREATHING APPARATUS WITH FULL
FACEPIECE OPERATED IN THE POSITIVE PRESSURE MODE.
Unusual Fire/Explosion Hazard:METHYL AND PHENYL BYPRODUCTS
Accidental Release
Spill Release Procedures:COLLECT AND PLACE SPILL IN APPROPRIATE
CONTAINER FOR WASTE DISPOSAL. VENTILATE AREA AND WASH SPILL SITE.
Neutralizing Agent:NOT APPLICABLE.
Handling
Handling and Storage Precautions:STORAGE-STORE IN CLOSED CONTAINER. USE
WITH ADEQUATE VENTILATION.
Other Precautions:WASH THOROUGHLY AFTER HANDLING MATERIAL.
Exposure Controls
Respiratory Protection:WEAR FACE MASK AND SELF-CONTAINED BREATHING
APPARATUS APPROVED BY U.S. BUREAU OF MINES.
Ventilation:PROVIDE SUFFICIENT MECHANICAL (GENERAL AND/OR LOCAL
EXHAUST) VENTILATION TO MAINTAIN EXPOSURE BELOW TLV(S).
Protective Gloves:RUBBER
Eye Protection:DUST-RESISTANT SAFETY GOGGLES
Other Protective Equipment:EYE WASH STATION, EMERGENCY SHOWER,
APPROPRIATE LABORATORY COAT TO COVER EXPOSED SKIN
Work Hygienic Practices:WASH EXPOSED AREAS WITH SOAP AND WATER.
Supplemental Safety and Health
Chemical Properties
HCC:N1
Spec Gravity:2.25
Solubility in Water:INSOLUBLE
Appearance and Odor:CONTINOUS FILM OF SILICONE RUBBER ON "FIBERGLASS"
BRAID - NO ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:FLAMES, CONDITIONS ABOVE 250 C WITHOUT
ADEQUATE VENTILATION
Hazardous Decomposition Products:METHYL AND PHENYL BYPRODUCTS
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. RECOMMENDED METHOD IS BY LANDFILL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.